Up FW AP7161

  • 0
  • 1
  • Question
  • Updated 1 year ago
  • Answered
I have 9 AP 7161 with Wing 5.7. I just got a warranty 1 AP with Wing 5.6.

Can you help me upgrage to Wing 5.7

Thanks you
Photo of Tuan Nguyen

Tuan Nguyen

  • 678 Points 500 badge 2x thumb

Posted 1 year ago

  • 0
  • 1
Photo of Edmundo Bermudez

Edmundo Bermudez

  • 498 Points 250 badge 2x thumb
Hi Tuan

Hi
You can download Wing AP 7161 Series v5.7.0.0 from the portal

https://extranet.extremenetworks.com/downloads/Pages/ExtremeWirelessWiNGAccessPointsEOS.aspx?softwareid=fff36733-70f4-4450-aa8a-3660e98aa699


CLI


ap71612-A41FF4#upgrade tftp://192.X.X.X:69/AP71XX-5.8.6.0-011...


UI



I recommend you upgrade to the latest version available Wing 5.9



Photo of Tuan Nguyen

Tuan Nguyen

  • 678 Points 500 badge 2x thumb
Thanks you, but i can't creat GTAC for download.

Can you give direct link fw?
Photo of Son Nguyen

Son Nguyen

  • 1,298 Points 1k badge 2x thumb
Dear Tuan,

Could you give me your email or phone number? I will support you.
Our company is Distributor of Extreme Networks in Vietnam (http://n-tek.vn/)

Thanks.
Photo of Tuan Nguyen

Tuan Nguyen

  • 678 Points 500 badge 2x thumb
Thanks @Son Nguyen

<info removed by admin after being received by Son>

Thanks for help
(Edited)
Photo of Daniel Mejia

Daniel Mejia, Employee

  • 1,056 Points 1k badge 2x thumb

Hi Tuan,

To your question. WiNG 5.7.x up to the latest newly released WiNG 5.9.0 for the AP7161 can be downloaded from our support portal (www.extremenetworks.com).

I have provided a direct link to the AP7161 firmware list below. Please note you will need to register on our support portal, also, active device entitlement is required for software downloads.

https://extranet.extremenetworks.com/downloads/Pages/ExtremeWirelessWiNGAccessPointsEOS.aspx

Photo of Tuan Nguyen

Tuan Nguyen

  • 678 Points 500 badge 2x thumb
Thank you

I can't creat GTAC for download on www.extremenetworks.com, if possible you can upload to google driver, dropbox, ... for me.

I have 10 AP7161, how to update the firmware at the same time. I am using a virtual controller.
Photo of Robert Zarzycki

Robert Zarzycki, Employee

  • 4,610 Points 4k badge 2x thumb
An active device entitlement (contract for AP)  is required for software downloads. 
Photo of Tuan Nguyen

Tuan Nguyen

  • 678 Points 500 badge 2x thumb
I have just successfully updated fw, however it only updates for Secondary. How to update to Primary. I have booted in Primary and up fw but not.
Photo of Robert Zarzycki

Robert Zarzycki, Employee

  • 4,610 Points 4k badge 2x thumb
Try booting from partition you want to upgrade and run the upgrade command again. 
Photo of Robert Zarzycki

Robert Zarzycki, Employee

  • 4,610 Points 4k badge 2x thumb
CLI command to choose boot partition: 
#boot system 
  primary    Primary image
 secondary  Secondary image

# reload 
(Edited)
Photo of Tuan Nguyen

Tuan Nguyen

  • 678 Points 500 badge 2x thumb
Dear sir
I have booted into primary an up fw, but still fw 5.6. 



Photo of Robert Zarzycki

Robert Zarzycki, Employee

  • 4,610 Points 4k badge 2x thumb
Can you run CLI command 'sh upgrade-status' and provide output. 
Photo of Robert Zarzycki

Robert Zarzycki, Employee

  • 4,610 Points 4k badge 2x thumb
also ' sh upgrade-status detail '
Photo of Christopher Frazee

Christopher Frazee, Employee

  • 1,862 Points 1k badge 2x thumb
It does not matter what partition the AP is booted in. WiNG 5 devices allow unused partition for staging purposes and to reload at a later date. If you wish to boot into v5.7.0 (highly recommend v5.8.6.1 or v5.9.0), from the CLI, perform the followng:

enable [enter]
boot system xxxxx [enter] (xxxx represents primary or secondary partition)
reload [enter]

AP will boot into the partition you selected for next boot. 

Again, it does not matter what version is in what partition. Only what partition you are booted in. 
Photo of Tuan Nguyen

Tuan Nguyen

  • 678 Points 500 badge 2x thumb
Hi everybody

I have 9 AP 7161 use fw wing 5.7, I voted 1 ap to VC. I want to upgrade all at once to wing 5.8 or 5.9.

Please help me.

Thank you
(Edited)
Photo of Robert Zarzycki

Robert Zarzycki, Employee

  • 4,610 Points 4k badge 2x thumb
Via CLI run command "device-upgrade all "
See article : https://gtacknowledge.extremenetworks...
Photo of Tuan Nguyen

Tuan Nguyen

  • 678 Points 500 badge 2x thumb
Thank you

What updates have affected System Profile because my system is working. Do I have to reconfigure?