Hi Prashant,In VC mode the limit is 64 APs. Since the VC mode supports heterogenous APs, you can set AP410i as a VC and manage your AP410i/310i with it but not the other way around. Here is a little VC Adoption matrix for your better understanding:
...
Hi Jan, The AP510C/CX are not universal APs. The current list of universal hardware for both Wired and Wireless is listed here:Universal Platforms - Extreme NetworksRegards,Ovais
Yes, that issue is only related to the Captive Portal. If you are not flipping the VLANs then you shouldn't have any issues. Since I have limited knowledge of your setup, my response below is based on assumptions:How are you integrating the XCC with ...
Glenn, Are you using different VLANs for Guest User registration and Guest Access after the successful auth.? If yes, we have recently discovered an issue that prevents the client from getting IP from a new VLAN even if correct role has been assigned...
Hi Bart,That guide addresses the use case where the WiNG AP/Controller is used as a Radius server and implements EAP-TLS as the authentication method. Of course, that would require you to add certificates to the AP/controllers that are working as Rad...
