AP150w ethernet configuration...

[sglassman]

Does anyone have any advice/experience with the AP150w Ethernet configuration? Specifically with radius-we are using an external radius server for all of our wifi but with this AP/Switch it appears we can only configure a single management IP and they share it between the wired/wireless side? On the radius side of things we may need to configure things differently for wired and wireless and I could not find a way to separate them or maybe there isn't a way which would be a big disappointment.

[samantha_lynn]

Right, the 4 ports on the AP150w are not switch ports exactly, since the device is ultimately still an AP. There is only one management IP, but you can assign different port configurations to different ports to separate/direct your wired traffic if you'd like.

[sglassman]

I am talking about management of the 4 port switch that is part of this AP, not the wireless side of things.

[samantha_lynn]

The management IP is going to be per AP, and is typically just used to connect to the device. You can put your client traffic, wired or wireless, on different VLANs to separate the traffic if that's what you're looking for? For wireless clients it would be via the VLAN assignment in the user profile within the SSID they are connecting to. For wired clients, we would make a device template and set what VLANs each port is using via the device template port settings. Is that what you're looking for?