AP150w ethernet configuration...

[sglassman]

Does anyone have any advice/experience with the AP150w Ethernet configuration? Specifically with radius-we are using an external radius server for all of our wifi but with this AP/Switch it appears we can only configure a single management IP and they share it between the wired/wireless side? On the radius side of things we may need to configure things differently for wired and wireless and I could not find a way to separate them or maybe there isn't a way which would be a big disappointment.

[fredfish]

So if I still have an OnPrem device I can't do this?

[samantha_lynn]

If you're using HiveManager (not HiveManager Classic), you'll want to go to Configure> Open the Network Policy> Device Template tab within the Network Policy> Create a new template for the AP150W> Select the port(s) you want to configure> Assign> Create New> Set the port as either an Access port (to allow only the Native VLAN) or a Trunk Port (to allow multiple VLANS)> Scroll down to the User Access Settings section and choose the user profile you want to apply to that port.

[fredfish]

Thank you for the quick reply. I'm using an AP150W, and user profile to a port would work great. I guess since I have never done that I'm not sure where I configure the port in the User profile.

[samantha_lynn]

What switch model are you using? You should be able to assign a user profile to a port type, and then apply that port type to all the ports you want guests connecting to in a switch template. If you can tell me which model you're using and which HiveManager platform you're using, I can give you more specific instructions.

[fredfish]

Sam, I know this topic has been over a year old. I'm trying to allow a guest to plug into the switch ports and be managed as a guest like I do on the wireless user profiles. Is that possible and how to i configure the individual ports as there are not any options on the AP config for that.