06-18-2018 11:42 AM
Hi ,
We are using Aerohive classic and I would like to know if it is possible to block IPV6 on the Access points.
I tried it with an application firewall rule, but it seems that IPv6 is not really detected this way.
Thanks in advance
Wigo
Solved! Go to Solution.
06-25-2018 08:40 PM
Hello Wim,
There is this command you can enter at the CLI of the AP:
user-profile <string> security deny {ipv4|ipv6}
To get the user-profile name, use the command:
show user-profile
Hope this helps,
David Souri
HiveCommunity Moderator
06-25-2018 08:40 PM
Hello Wim,
There is this command you can enter at the CLI of the AP:
user-profile <string> security deny {ipv4|ipv6}
To get the user-profile name, use the command:
show user-profile
Hope this helps,
David Souri
HiveCommunity Moderator
06-19-2018 01:25 PM
06-18-2018 05:25 PM
Hello,
Could you advise the Version of Hivemanager Classic? Help -> About Hivemanager
Additionally, the Model of APs?
And the HiveOS Versions on the APs.
Thank you,
David Souri
HiveCommunity Moderator