06-03-2019 12:40 PM
Hi, there is a Netgear POE switch on which Aerohive AP122 will be connected but the POE switch has IEEE 802.3af (DTE Power Via MDI) mentioned in its protocol, so will the AP122 be compatible to draw power from this switch?
Regards
Solved! Go to Solution.
06-13-2019 04:46 PM
Thanks for your patience while we looked in to this for you, the DTW power via MDI should not matter to our devices, they will receive power from that switch.
06-17-2019 06:29 AM
Thanks Sam for confirming.
06-13-2019 04:46 PM
Thanks for your patience while we looked in to this for you, the DTW power via MDI should not matter to our devices, they will receive power from that switch.
06-04-2019 01:59 AM
Hi Sam,
Thanks for the response but does DTE Power Via MDI has anything to do with the compatibility??
Regard
06-03-2019 01:42 PM
The AP122 can work with af power, per the datasheet for that model, under the power section: https://www.aerohive.com/wp-content/uploads/Aerohive_Datasheet_AP122.pdf