cancel
Showing results for 
Search instead for 
Did you mean: 

Delay performance of eth1 port bridging mode

Delay performance of eth1 port bridging mode

neroanelli
New Contributor

I have set eth1 to bridge mode with my AP230,and the desktop connected to the port works well.But I have something weird,I run ping command from the desktop to the gateway(local LAN),received about 10ms.And then,I run ping command from the AP230 CLI,received <1ms.

I use 12V power adapter for my AP230.

1 REPLY 1

neroanelli
New Contributor

Other Servers from the LAN received <1ms when ping to the AP except the one connect ed to eth1.

GTM-P2G8KFN