cancel
Showing results for 
Search instead for 
Did you mean: 

Does anybody know what means "sta(at if=wifi0.1) is deauthenticated because of notification of driver" in client monitor of Hivemanager Classic V8.2r2?

Does anybody know what means "sta(at if=wifi0.1) is deauthenticated because of notification of driver" in client monitor of Hivemanager Classic V8.2r2?

AnonymousM
Valued Contributor II
Does anybody know what means "sta(at if=wifi0.1) is deauthenticated because of notification of driver" in client monitor of Hivemanager Classic V8.2r2?
1 ACCEPTED SOLUTION

dsouri
Contributor III

Hi Gunter,

 

Typically, given all other conditions are fair, the client device disconnected from the radio. To really know why, it's best to see more of what happened Before & After the deauthenticated log entry.

 

Is there an overall issue you are looking into, or just exploring the Client Monitor tool?

 

Happy to help, 

David Souri

HiveCommunity Moderator

View solution in original post

22 REPLIES 22

luciano
New Contributor

 

Thank you, I made the adjustments as I was told, and solved my problem.

luciano
New Contributor

 

OK. thanks for the tip, I will disable this option and test today during peak hours to see if it solved

 

dparsons
Contributor

Be careful on using "Enable client load balancing among neighboring hive members for APs." It is only recommended for APs that can see each other such as in large meeting rooms with more than one AP or long halls with more than one AP. We have 5 locations on campus that uses it but no where else. Works very good in the auditorium. But when the APs are in different rooms it can cause issues and is not recommended.

luciano
New Contributor

2ea3d080fb4042cd89df60ec90115542_0690c000007spR3AAI.pngwe are also a community university with about 700 simutaneous accesses, in my case this change to force the devices to connect in 5 GHz was faulted about 15 days approximately and the reason that started this connection problem.

I made the change so that the AP will encourage the connection at 5 GHz and no longer force it. I also did the activation of the Enable client load balancing among neighboring hive members. for APs.

 

GTM-P2G8KFN