Does anybody know what means "sta(at if=wifi0.1) is deauthenticated because of notification of driver" in client monitor of Hivemanager Classic V8.2r2?

[AnonymousM]

Does anybody know what means "sta(at if=wifi0.1) is deauthenticated because of notification of driver" in client monitor of Hivemanager Classic V8.2r2?

[dparsons]

However you are forcing the ratio I am only encouraging the client to use 5. Since you are forcing the ratio if the ration exceeds 20% then the client would not be able to connect. What is the current ratio at? Unless there is a need to force it I would recommend only encouraging it.

Here is my environment. We are a community college with a peak of 1000 students online during the day.

[dparsons]

I am using it with no issue.

[luciano]

I took a look here to activate vht this disabled ja. a question about balancing can cause some problem like this? being configured this way?

[dparsons]

Okay good. We had/have an issue with some Intel wireless adapters in Dell laptops that have bad drivers that give the same results.

I would recommend cloning the default radio profiles for 2.4. Then apply that to an AP to test against. If the device can then connect, next change one setting at a time in the profile and test again. There are several settings that can break clients such as "Enable VHT" on the 2.4. If you have this enable try just turning it off, it was breaking my cell phones. By making one change at a time you should be able to determine which setting or settings are causing the issue.

[luciano]

one thing I noticed was that the devices that connect at 5 GHz it does not have this problem. but the ones that connect in 2.4 have this problem. for example here in TI we have some devices most connect in 5 GHz in AC and we have no problem of this type already 2 devices that we have here that are 2.4 GHz suffer repeatedly drops and connection failures