cancel
Showing results for 
Search instead for 
Did you mean: 

High Interference after update

High Interference after update

cporter1
New Contributor

We just upgraded our AP250's from 7.1 to 10.0r5 and are getting a ton of high interference alerts. Both radios on almost all AP's are set for 5ghz and auto power and channel. Has anyone else run into this?

11 REPLIES 11

admin32
New Contributor

yes, there was some comment about it in release notes somewhere a few versions back and it is yet to be fixed. The dashboard readings are not to be believed which is a tad annoying. We had a great dashboard of graph results for years and it now looks like a cluster storm network set up by idiots with only the software versions having changed.

You will find that ssh results from troubleshooting the APs directly are actually fine and as they always were. It does take a while to get your head around it and decide which to believe.

similar things happened in various 8x versions as well

samantha_lynn
Esteemed Contributor III

I'd like to report this to our engineers so they can look in to this. Would you be able to get tech data from the same AP on 7.1 and 10.0r5 so we can compare the interference detected at each version? Below are some guides on how to collect tech data, if you'd like to send these directly to me, my email is Communityhelp@aerohive.com.

 

HiveManager Classic-https://thehivecommunity.aerohive.com/s/article/How-to-download-tech-data-in-Classic 

 

HiveManager NG-https://thehivecommunity.aerohive.com/s/article/How-to-download-tech-data-in-HiveManager 

 

Device CLI-https://thehivecommunity.aerohive.com/s/article/Collecting-Tech-Data-via-CLI  

 

 

GTM-P2G8KFN