High interference alarms on AP250

[kiet_nguyen]

We have 10 AP250 in the building and they are all getting high interference alarms on both Wifi0 and Wifi1. I tired updating the AP250 from 10.0r5a to 10.0r7a, but it still persist. I am not seeing any channels overlapping or high interference when checking each WAP Wifi interfaces. I have set the channel and transmission power to auto on all of them. Do I have to configure anything else? Also, I am new at this. Thanks!

[samantha_lynn]

Hi Jared, we have a rough estimate of an early February release, providing there are no more set backs.

[janderson1]

Sam, do you have a time frame of when that will be released? I downgraded from 10.0r7 due to the high interference alert errors but I am still receiving these.

[darnaiztome]

Thanks Sam, I'll wait for it 🙂

[samantha_lynn]

There is a known issue with the 10.x line that causes false interference alarms. This should be fixed in 10.0r8 when that is released.

[darnaiztome]

Thanks Sam, I downgraded to 8.4r11 in all AP250 and during all day, we just get one or a couple of High interference alarms, and it quickly leave..,. humm, I do not know what to think....