cancel
Showing results for 
Search instead for 
Did you mean: 

High interference alarms on AP250

High interference alarms on AP250

kiet_nguyen
New Contributor

We have 10 AP250 in the building and they are all getting high interference alarms on both Wifi0 and Wifi1. I tired updating the AP250 from 10.0r5a to 10.0r7a, but it still persist. I am not seeing any channels overlapping or high interference when checking each WAP Wifi interfaces. I have set the channel and transmission power to auto on all of them. Do I have to configure anything else? Also, I am new at this. Thanks!

13 REPLIES 13

AnonymousM
Valued Contributor II

Yeah I'm still getting it as well. I can downgrade to version 8 golden from 10.0.r8 on my 250 & I am good!

samantha_lynn
Esteemed Contributor III

You might want to open a technical support case so we can troubleshoot that further with you.

janderson1
New Contributor

I seem to be getting the High Interference Alert already after upgrading.

samantha_lynn
Esteemed Contributor III

I just wanted to update this post to let you know 10.0r8 was released. Please let me know if you have any questions about the new IQ Engine version.

GTM-P2G8KFN