cancel
Showing results for 
Search instead for 
Did you mean: 

How to add mac addresses to our access point

How to add mac addresses to our access point

steven_deleon
New Contributor
How to add mac addresses to our access point
3 REPLIES 3

samantha_lynn
Esteemed Contributor III

Thank you for clarifying. This guide will walk you through how to set this up using HiveManager (formerly NG, cloud.aerohive.com) (Scroll down to the Radius using MAC Authentication section towards the end)- https://thehivecommunity.aerohive.com/s/article/Radius-SSID-in-NG

 

This guide will walk you through how to set this up using HiveManager Classic (myhive.aerohive.com)- https://thehivecommunity.aerohive.com/s/article/MAC-Authentication-Set-Up

 

Does that answer your question?

steven_deleon
New Contributor

​Yes, users authenticate with the MAC address to the their own device and only their own device can login.

samantha_lynn
Esteemed Contributor III

I'm sorry, I'm not sure what you're asking here. Are you asking how to add a MAC authentication policy (users authenticate with the MAC address of their device so only known devices can log on) to an AP? Or how to add MAC addresses to an existing MAC auth policy?

GTM-P2G8KFN