cancel
Showing results for 
Search instead for 
Did you mean: 

I cannot access my switch SR2024P via web UI. I can access it using Putty, but the commands listed in the forum : Enable and ip http server will not work. What command lists the current status of the switch to confirm what state it is in?

I cannot access my switch SR2024P via web UI. I can access it using Putty, but the commands listed in the forum : Enable and ip http server will not work. What command lists the current status of the switch to confirm what state it is in?

rkestle
New Contributor
I cannot access my switch SR2024P via web UI. I can access it using Putty, but the commands listed in the forum : Enable and ip http server will not work. What command lists the current status of the switch to confirm what state it is in?
4 REPLIES 4

dparsons
Contributor

http://docs.aerohive.com/330000/docs/help/english/documentation/cli_guide_sr2024p_6-1r6.htm

 

The other link is for the SR2024 not the SR2024P but the commands are the same.

dparsons
Contributor

I do not have a SR20XX series switch online so I cannot confirm but if you run a show tech command you can see if there are any of the show commands that will list the status of the web interface.

 

dparsons
Contributor

http://docs.aerohive.com/330000/docs/help/english/6.0r2/ref/cli_guide_sr2024.htm

dparsons
Contributor

Can you confirm you are working on a SR2024P? Just want to make sure that is not a typo.

 

Also where did you find the enable and ip http server commands? Those are not for the 2024. For the 2024 the command is "system web-server enable".

GTM-P2G8KFN