cancel
Showing results for 
Search instead for 
Did you mean: 

I need to move some AP330s from an old HiveManager Express 5.1r3.56 to a new partially configured HiveManager NG which has 11 AP250's already running on it. The old HiveManager can see the new AP250's, but the new HiveManager NG cannot see the old AP

I need to move some AP330s from an old HiveManager Express 5.1r3.56 to a new partially configured HiveManager NG which has 11 AP250's already running on it. The old HiveManager can see the new AP250's, but the new HiveManager NG cannot see the old AP

keith_modglin
New Contributor
I need to move some AP330s from an old HiveManager Express 5.1r3.56 to a new partially configured HiveManager NG which has 11 AP250's already running on it. The old HiveManager can see the new AP250's, but the new HiveManager NG cannot see the old AP
1 REPLY 1

samantha_lynn
Esteemed Contributor III

Have you added the 330s to the HiveManager NG device inventory? And do you have enough licenses in HiveManager to support all of the devices from Classic?

 

This guide reviews how to remove devices from your HiveManager Classic inventory: https://thehivecommunity.aerohive.com/s/article/How-To-Remove-Devices-from-HiveManager-Classic-Devic...

 

This guide reviews how to add devices to your HiveManager inventory: https://thehivecommunity.aerohive.com/s/article/Adding-and-Removing-Devices-in-HiveManager

 

And this guide reviews how to check your licenses in HiveManager: https://thehivecommunity.aerohive.com/s/article/How-To-Check-Licenses-in-HiveManager

 

GTM-P2G8KFN