Need confirmation of firmware load

[gpower]

I recently updated one of our SR2148P switches from 6.5r5 Honolulu 136354 to 6.6r2-SR2000-6.6r2a.img.S. HiveManager reported that the firmware uploaded successfully. After that, the switch would not boot up. The next day I power cycled the switch and had the same result. I later connected a console cable to view the boot up messages and it booted up fine at that time.

I just need to know if the 6.6.r2 load is stable since we are beginning to apply that to a number of our critical switches. Thanks

[GeorgiaMason · Accepted solution]

According to their firmware matrix, 6.5r9a is the most stable release for that device, might want to try that one?

Matrix- https://thehivecommunity.aerohive.com/s/question/0D50c00005jmpq9CAA/