cancel
Showing results for 
Search instead for 
Did you mean: 

the error is wifi0: A high interference alert was raised. what does this mean and how do I resolve

the error is wifi0: A high interference alert was raised. what does this mean and how do I resolve

lbeem
New Contributor
the error is wifi0: A high interference alert was raised. what does this mean and how do I resolve
1 ACCEPTED SOLUTION

samantha_lynn
Esteemed Contributor III

This indicates you have Radio Frequency interference on your network. The following guide will help you troubleshoot this, depending on what HiveManager platform you are using.

 

HiveManager Classic (myhive.aerohive.com)- https://thehivecommunity.aerohive.com/s/article/Radio-Frequency-Interference-Troubleshooting

 

HiveManager (formerly NG, cloud.aerohive.com)- https://thehivecommunity.aerohive.com/s/article/Radio-Frequency-Interference-NG

View solution in original post

14 REPLIES 14

AnonymousM
Valued Contributor II

We are also see a lot of continuous errors " wifi0: A high interference alert was raised" on all our AP230 and AP250, when we upgraded to the latest firmware "HiveOS 8.4r10.219856". Any suggestions?

samantha_lynn
Esteemed Contributor III

Thank you for that data, but unfortunately both files are showing they are from a device on HiveOS 8.2r4. Could you update to the latest, get tech data from that version, then if the issue is still present downgrade to a version that does not have this issue and send tech data from that set up as well?

luciano
New Contributor

 

I just sent you an email with the requested data.

samantha_lynn
Esteemed Contributor III

Yes, can you update to the latest and see if the problem is still present?

luciano
New Contributor

 

the HiveOS version 8.2r5.221111 for me is lasted a golden for me in myhive is HiveOS 8.2r4.207023

GTM-P2G8KFN