This website uses cookies. By clicking Accept, you consent to the use of cookies. Click Here to learn more about how we use cookies.
Accept
Reject
Help
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 

Upload older HiveOS firmware to hivemanager classic online.

Upload older HiveOS firmware to hivemanager classic online.

paul_specht
New Contributor

‎10-19-2018 03:22 PM

Can it be done? I have some WAPs that are at 6.6, and want to go to 8.0 first before 8.2. but it is not in the list on the OS dropdown.

0 Kudos
11 REPLIES 11

paul_specht
New Contributor

‎10-19-2018 07:34 PM

Ok thanks. I have port 22 blocked outbound. I will see what I can do, now that I found the issue.

 

THANKS for your assistance!

0 Kudos

samantha_lynn
Esteemed Contributor III

‎10-19-2018 07:22 PM

Unfortunately we don't have a list, it would have to be so large to accommodate some of our dynamic scopes that it would be virtually unusable. Generally we suggest allowing the following ports to pass outbound traffic: UDP 12222, TCP 22, HTTP 80, TCP 443.

0 Kudos

paul_specht
New Contributor

‎10-19-2018 07:11 PM

I found it was blocked on my firewall. I created and ACL to allow any inside to 34.225.92.51 and was able to upgrade. are there a list of aerhive IP ranges that I can put in an ACL to allow to?

0 Kudos

paul_specht
New Contributor

‎10-19-2018 07:06 PM

I tested on 8 WAPs. 4 successfully updated. 3 stopped at 55% with no error, and one gave me this error

 

"An error occurred when executing the following CLI command: save image scp:/​/​******@34.225.92.51:/​HiveManager/​downloads/​home/​image/​AP230-8.0r1a.img.S 04:05:00 2018-06-28 no-prompt _password ******.

The Aerohive device was unable to upgrade image to flash memory because there is not enough memory in the device or there is error occued during the file transfer process."

0 Kudos
GTM-P2G8KFN