What is the best way to push the following config to an estate of 64 ap's?

[gammon1985]

What is the best way to push the following config to an estate of 64 ap's?

Other than logging onto them individually and copying/pasting it in.

Trying to block unwanted Mdns traffic and not currently using ipv6 on the aps, but want to block at ap level rather than switch.

user-profile default-profile security deny ipv6

save config running current

[gammon1985]

Sorry I should have added which version we are using.

It is the below:

But have stumbled across where that setting is "Enable supplemental cli"

Home/Hivemanager settings

8.2r2a

Many thanks will give that a go 

[samantha_lynn · Accepted solution]

You would want to build a supplemental CLI object. This is a list of commands to be pushed to the APs each time they reboot. This gets around the problem of configuration CLI settings getting erased every time the AP reboots, and allows you to push these commands to every AP within the same network policy.

If you are using HiveManager (formerly NG, cloud.aerohive.com), this guide will walk you through how to build a Supplemental CLI object- https://thehivecommunity.aerohive.com/s/article/Supplemental-CLI-NG