02-11-2020 10:11 AM
Hello,
When I go to the "Firewall Configuration Guide" I open this page : https://extremecloudiq.com/support/Amsterdam.html
So in order to work I need to open these ports :
TCP 80, 443, 2083, 20000-20256 and UDP 12222
I open these ports on my firewall but the AP130 can't connect (The led is red).
If I open all ports on my firewall it works perfectly.
What ports do I need to pen more ?
Thanks
02-11-2020 03:12 PM
This page reviews the ports we use and what services those ports are used for, but as far as I know UPD 12222 should be the only UDP port needed for an AP to connect: http://docs.aerohive.com/330000/docs/help/english/ng/Content/reference/services-source-and-destination-ports.htm?
02-11-2020 02:17 PM
No it does not work with adding the UDP123.
02-11-2020 02:07 PM
Thank you for keeping me updated. We use UDP 123 for NTP traffic, could you try that port for me?
02-11-2020 02:04 PM
Thanks for your response.
I tried to add TCP22 port from my list but it still does not work.
If I open TCP 80, 443, 2083, 20000-20256 and all UDP ports (ie 0-65535) it works.
So I suppose the missing port is a UDP port.