Hi,
Is everything to be configured? or I have to enable the different events that I want to observe in the syslog:
logging enable
Enables system log messages and traps for the specified protocol or event.
Syntax logging enable {bfd | cfm | config-changed | fan-speed-change | fan-state-change | ikev2 | ikev2-extended | ipsec | linkstate-change | mac-mismatch-detection | mgmt-mod-redun-state-change | module-hotswap | mpls | mvrp-vlan | ntp | ospf | pki-extended | rstp | snmp-auth-failure | temp-error | user-login | vrrp-config-validate | vrrp-if-state-change} no logging enable {bfd | cfm | config-changed | fan-speed-change | fan-state-change | ikev2 | ikev2-extended | ipsec | linkstate-change | mac-mismatch-detection | mgmt-mod-redun-state-change | module-hotswap | mpls | mvrp-vlan | ntp | ospf | pki-extended | rstp | snmp-auth-failure | temp-error | user-login | vrrp-config-validate | vrrp-if-state-change}
Command Default
Log messages for specific protocols or events are enabled.
