cancel
Showing results for 
Search instead for 
Did you mean: 

MLXe chassis showing as MLX (( Netiron ))

MLXe chassis showing as MLX (( Netiron ))

VPLS
New Contributor

Hello , 

 

I have a strange problem ,  MLXe 4 chassis think it’s MLX Chassis, 

I tried upgrading it to different version with no avail , 

telnet@SE-LAB#sh version
System Mode: MLX
Chassis: NetIron 4-slot (Serial #: *******,  Part #: *******)
NI-X-HSF Switch Fabric Module 1 (Serial #: ******,  Part #: ****)

 

 

any way I can fix this identity crisis ?
 

21 REPLIES 21

joergkost
Contributor II

Can  you run 

dm read-chassis-eeprom 2F 1

If it says ,

HEX:
AC

this MLXe may been modified to identify itself as a Netiron XMR. You might recover it by using the dm write-chassis-eeprom 2F counterpart and a crafted hex-string containing a MLXE-4 value to overwrite this one identity byte. However, this is a very special and dangerous command. It can really brick your device, so you should/must ask the official Extreme support or reference to community \at/ extremenetworks.com before any action.

As I guess, that this MLXe has no support contract anymore, they maybe can give you some mercy for this one.

 

 

VPLS
New Contributor

 

Hello , 

 

here is the output for dm manu-get backplane

=== Manufacturing Information ====
Board Class : 0x86 (4-slot Backplane)
Factory Assembly Part Number : 40-1000363-03
Chassis Type: NI-XMR (0xac)
Factory Serial Number : BFA1720GJT
Chassis Serial Number : BGD2512H01
Power Type: Unknown (00)
Date of Manufacture : 19-3-2012
Bench Test Status : PASSED
Burn-in Test Status : PASSED
Manufacturing Deviation :
RMA Number :
OEM Vendor: None
OEM Vendor Serial Number:
OEM Vendor Part Number:
PCB Revision :
MFG Test :
SW License Id: ***********

joergkost
Contributor II

Did you check  the following commands:

dm manu-get 

For example on the MLXe-4 it will show something like:

dm manu-get backplane

=== Manufacturing Information ====
Board Class : 0x86 (4-slot Backplane)
Factory Assembly Part Number : 40-1000363-04
Chassis Type: BR-MLXe (0xf0)
Factory Serial Number : BF*********
Chassis Serial Number : BG*********
Power Type: Unknown (00)
Date of Manufacture : 11-10-2013
Bench Test Status : PASSED
Burn-in Test Status : PASSED
Manufacturing Deviation :
RMA Number :
OEM Vendor: None
OEM Vendor Serial Number:
OEM Vendor Part Number:
PCB Revision :
MFG Test :
SW License Id: ********

 What is the board-class and chassis type for your device there?  

Maybe in the past somebody wrote / changed the identity for this device  in the eeprom? 

 

 

VPLS
New Contributor

yea it is older device , 

we had to pull it out from  the datacenter and put it on the lab after it had this identity crisis ,

and Iam trying to figure out if there is a way to force it to act as MLXe-4 again 

joergkost
Contributor II

Interesting, while the part number is obvious the MLXe-4 chassis, the serial number is not lookup able from the portal. This is an older device,  isn’t it? Like from 2010 or 2011? Maybe it is one of the earlier devices or was once a lab or test device? 

GTM-P2G8KFN