QnQ on CER

[lcarl]

Try to enter he command tag-type and seems like not working or not on the older code. Wanted to configure QnQ on  CER

[lcarl]

With the following what is the tag type     8100, /9100…...or  on port 2/3

interface ethernet 2/3

port-type provider-network

[lcarl]

Looks like CER unlike MLX from what read does not support tag-type command.. looking at Port-based Service Interface Super Aggregated
VLANs (SAV) on the CER…. Issue is if change tag2 to 9100 and apply to the network port it will impact other traffic

[Deep_Bakul_Bhoj]

I am able to configure “tag-type” on 5.6d code. The configuration is under the global configuration mode. Please let us know what error are they seeing.

[lcarl]

As mentioned could be older version. I now have the version and it is 5.6.f    I did tell him to upgrade…. Was this supported in 5.6.f?