cancel
Showing results for 
Search instead for 
Did you mean: 

how to configure snmp host when the snmp server is in one VRF?

how to configure snmp host when the snmp server is in one VRF?

println
New Contributor III
how to configure snmp host when the snmp server address is in one VRF? Is it support? Thank you.
9 REPLIES 9

println
New Contributor III
I‘m understand that now. Thanks a lot Michael!’

Michael_Morey
Extreme Employee
I think I better understand your issue now.

My previous post mainly pertains to incoming SNMP managment traffic, which is allowed on any VRF. However outbound management traffic is only sent out via the Default VRF or the configured Mangement VRF as Sargis detailed.

Your SNMP management device will need to either be on the default VRF or on the configured Management VRF.
Michael Morey
Principal Technical Support Engineer
Extreme Networks

println
New Contributor III
Thank you Sargis!

println
New Contributor III
Hi Michael,
How can the vrf aware the NMS is in global routing table? I never use the snmp context, could you pls explain a little bit more on how it works? Thanks.
GTM-P2G8KFN