SLX 9540 dosn't boot ok

[GerardoS]

The SLX was working fine, but I had problem when I tried to upgrade the firmware. I tried to install the firmware via onie rescue, but when I set the command (into de onie) "reboot global" (for error), the SLX started to reload, and then it seems to stayed in a loop with the next messages:

============= PEIM FSP v1.0 (_BDX-DE_ v0.0.3.2) =============
Loading PEIM at 0x000FFEB8638 EntryPoint=0x000FFEB8CF0
Loading PEIM at 0x000FFEBB080 EntryPoint=0x000FFEBC6D4
Loading PEIM at 0x000FFEBCA2C EntryPoint=0x000FFEBD000
Loading PEIM at 0x000FFEBE6BC EntryPoint=0x000FFEBEC24
Loading PEIM at 0x000FFEBFBEC EntryPoint=0x000FFEC04F8
Loading PEIM at 0x000FFEC247C EntryPoint=0x000FFEC33E4
Loading PEIM at 0x000FFEC5064 EntryPoint=0x000FFEC5CD4
Loading PEIM at 0x000FFEC7B2C EntryPoint=0x000FFEF4044

Send HostResetWarning notification to ME.
ME UMA: WARNING: HostResetWarning called on non S3/4 resume flow (0) - ignore▒
GEN_PMCON_1: 0x200
GEN_PMCON_2: 0x6000
GEN_PMCON_3: 0x1a08
PRSTS: 0x5050900

Could somebody helpme please?

[Truyen_Phan · Accepted solution]

Have you tried to recover the 9540 by running a netinstall? 

If you need help with the procedure, please contact Extreme GTAC Support. 

https://extremeportal.force.com/ExtrArticleDetail?an=000082418

https://extremeportal.force.com/ExtrArticleDetail?an=000080612

[GerardoS]

Hi, thanks for your help, yes I solved this issue to applying the
netinstall procedure.

Thanks.