Vlan(trunk) on port channel?

[Pawel_Eljasz]

hi guys,
I'm hoping this is possible - scenario is:
a port channel (2 switches x 1 port) which is a vlan 9. That port channel is in access mode.
Can I use eth interfaces/ports(some or all) of that channel in trunk mode? (for iscsi)

Eg.:
Te 1/0/45 + Te 2/0/45 = Po 25 in access mode vlan 9

Te 1/0/45 = in trunk for vlan 9 & 99 ?

How this could be achieved?
Many thanks, L.

[Yulia_Abitbul]

No, you can not configure same port as access and trunk at the same time

[Ronald_Dvorak]

What product/model are we talking about here !?

And no you can't configure part of a LAG - all ports in the LAG have the same configuration.