cancel
Showing results for 
Search instead for 
Did you mean: 

VDX 6740 active standby problem

VDX 6740 active standby problem

Riccardo_Verald
New Contributor II
Hello,
I have 6 VDX 6740 switches.
on one of them I have this situation.

sw0# sh ver

Network Operating System Software
Network Operating System Version: 6.0.2
Copyright (c) 1995-2015 Brocade Communications Systems, Inc.
Firmware name: 6.0.2h
Build Time: 22:04:56 Apr 12, 2018
Install Time: 18:15:41 Oct 3, 2018
Kernel: 2.6.34.6

BootProm: 1.0.1
Control Processor: e500mc with 4096 MB of memory

Slot Name Primary/Secondary Versions Status
---------------------------------------------------------------------------
SW/0 NOS 6.0.2h ACTIVE*
7.0.2b

so SW/1 is not coming up.
is there a way to force it to get up ?
Also there is a secondary image 7.0.2b which I would like to wipe.

on my other switches I have

switch-ana-vdx01# sh ver

Network Operating System Software
Network Operating System Version: 6.0.2
Copyright (c) 1995-2015 Brocade Communications Systems, Inc.
Firmware name: 6.0.2h
Build Time: 22:04:56 Apr 12, 2018
Install Time: 16:28:19 Sep 27, 2018
Kernel: 2.6.34.6

BootProm: 1.0.1
Control Processor: e500mc with 4096 MB of memory

Slot Name Primary/Secondary Versions Status
---------------------------------------------------------------------------
SW/0 NOS 6.0.2h ACTIVE*
6.0.2h
SW/1 NOS 6.0.2h STANDBY
6.0.2h

thanks

5 REPLIES 5

Jason_Howlett
Extreme Employee
Ha Sync command should be used here
GTM-P2G8KFN