Hello,
I have 6 VDX 6740 switches.
on one of them I have this situation.
sw0# sh ver
Network Operating System Software
Network Operating System Version: 6.0.2
Copyright (c) 1995-2015 Brocade Communications Systems, Inc.
Firmware name: 6.0.2h
B...
Hello,
I tried to upgrade a VDX 6740 from 7.0.1 to 7.0.2b
after the first reboot it won't come up anymore and five this error:
bhpc_irq_init: Using default device map. Size 10
bhpc_irq_init: Pcie domain 0 err interrupt handler Installed
Starting Dc...
Hello,
I Would like to downgrade the firmware version on VDX 6740 from 7.3.0 on 6.0.2 on one switch.
is there any particular procedure ?
Is it the same procedure as firmware upgrade ?
thanks
on VDX 6740 I cannot save the running config when the switch is in Logical Chassis mode
sw0# copy running-config startup-config
This operation is not supported in logical chassis mode.
Do I have to disable the logical chassis mode to be able to sa...
the first thing I tried is ha sync and it did not solve the problem.
if I go for Netinstall is there a way to backup the licenses which are now installed and reinstall them back at the end ?
more information. after very LONG time the switch comes up but the standby party cannot come up
switch-ana-vdx01# sh ver
Network Operating System Software
Network Operating System Version: 7.0.2b
Copyright (c) 2017-2018 Extreme Networks, Inc.
Firmw...
the problem I think it is solved. I registered on the extreme support site and I am allowed to downlaod older version of network OS. In particular 7.0.2b is allowed and I Am downloading it now. This solves my problem I think. Thanks a lot for the sup...
