09-03-2024 03:31 AM
Hi All,
Currently, several VDX8770 and VDX6740T are configured with VCS fabric, as shown below.
* VDX8770 <---> VDX6740T
Here, we need additional configuration of Transparent firewall between VDX8770 and VDX6740 ISL port.
* VDX8770 <--> Transparent Firewall <--> VDX6740T
Q1) If additional transparent firewalls are connected between ISL ports, will the fabric configuration work properly between VDXs?
Q2) Is there an official reference for these configurations?
Thanks.
Solved! Go to Solution.
09-03-2024 06:41 PM
Hi Mick,
Thank you for your reply.
Is there an article or document that explains this?
Thanks.
09-03-2024 05:41 AM
VCS fabric ISL will only form between directly connected VDX switches.
It is not possible to connect an intermediate device between switches in a VCS fabric.
09-03-2024 06:41 PM
Hi Mick,
Thank you for your reply.
Is there an article or document that explains this?
Thanks.
09-09-2024 02:40 AM
Hi,
There is not a specific document that I am aware of, but on page 22 of nos-740-management.pdf (extremenetworks.com)
"When a switch joins an Ethernet fabric, ISLs automatically form between directly connected switches within the fabric."