cancel
Showing results for 
Search instead for 
Did you mean: 

VDX6740 VE Interface issue

VDX6740 VE Interface issue

BS_Choi
New Contributor

Hi everyone,

I configured VRF and Static routing using ve interface. The VLAN is inactive but ve interface status is up.

 Is is possible to force the VE to go down when the VLAN is INACTIVE?

 

sw0# show vlan 500
VLAN             Name            State                      Ports           Classification
(F)-FCoE                                                    (u)-Untagged
(R)-RSPAN                                                   (c)-Converged
(T)-TRANSPARENT                                             (t)-Tagged
================ =============== ========================== =============== ====================
500              VLAN0500        INACTIVE(member port down) Te 2/0/5(u)

 

sw0# show ip interface brief rbridge-id 2

Flags:  U - Unnumbered interface
Interface                          IP-Address         Vrf                               Status                 Protocol
==========================         ==========         ==================                ====================   ========
Ve 500                             10.10.10.2         test                              up                     up
 

                                                            

1 ACCEPTED SOLUTION

Michael_Andreas
Extreme Employee

Hello,

 

  The VE will stay up / up on a VDX while there is an active up ISL as there could be active interfaces on other RBridges.

 

Regards

View solution in original post

1 REPLY 1

Michael_Andreas
Extreme Employee

Hello,

 

  The VE will stay up / up on a VDX while there is an active up ISL as there could be active interfaces on other RBridges.

 

Regards

GTM-P2G8KFN