04-17-2023 06:56 AM
Our support teams published 53 new articles last week! Check out the new titles below!
All
SA-2023-038 - OpenSSL X.509 Certificate Chains (CVE-2023-0464)
SA-2023-039 - OpenSSL Certificate Policy Check (CVE-2023-0466)
SA-2023-037 - Apache Tomcat JSESSIONID Cookie (CVE-2023-28708)
SA-2023-036 - Amazon Corretto Vulnerabilities Advisory (multiple CVEs)
Campus Fabric Articles
VSP : Unable to get SNMP working on switch
VSP 8200 crashed with core dump
5520-48W Using VIM-4X and Running Fabric Engine Does Not Show Ports 2/1-2/4 Available
ERS: SNMPv3 not working on switch
VOSS - "60 percent of fbufs are in use" message appearing in the logs every 5 minutes
FreeRADIUS SSH switch management authentication failing with VOSS/VSP but works with BOSS/ERS
VOSS / Fabric Engine – Traffic /Ping Fails Between Two DVR Hosts Through L2VSN
Fabric Engine : Switch crashed with core dump when attempted a new SSH connection after the CLI SSH ...
Data Center Articles
VDX - What impact does enabling uRPF have on the TCAM
EFA login does not work as expected
SLX failover test had noticed a traffic loss.
EXOS Articles
VPEX configuration missing after reboot of CB when enabling stacking
5420F-8W-16P-4XE LED, PoE and Port mapping not in sync on SwitchEngine version 32.2.1.8.
General Articles
How to configure the MTU size in the CLI on 200 Series switches
Legacy Articles
[XIQ-C] Does AP change MTU based on Path MTU discovery?
Is there any settings on XCC which can redirect client to different SSID if failed to connect
SD-WAN Articles
How does the orchestrator determine the software version installed on an ip|engine?
Is it possible to generate a customized report with different periods in SALSA 9.3?
Universal Articles
"Temperature (139 C) out of operating range" followed 15 seconds later by "Temperature (67 C) is bac...
5420 switch stops providing PoE and recovers after a reboot
WiNG Articles
Is there an OID to get the boot count of a switch which shows up by the command "show switch"?
WiNG - APs generating RADIO_STATE_CHANGE - changing state from 'Initializing' to 'Off(channel invali...
DNS hostname was changed and APs at some locations are now unable to resolve DNS
WiNG - How many APs does an RF Domain Manager support?
Many Access Points show Adoption Errors and cfgd Crash files were found in tech supports
Newly deployed Access Point unable to adopt to Site Controller after the OneView NOC controller was ...
XIQ Articles
Where can I find an explanation of WIFI Client Health in Extreme Cloud IQ?
XIQ Search Bar Limitation
Onboarding XIQ-SE to an XIQ instance when your email address been added to that instance as an exter...
0.0.0.0 records across all SSIDs in client 360
What are the LED patterns on the AP560?
How to add locations from outside the United States, for an XIQ-Pilot VHM in the United States
XIQ Device Update Failed error due to corrupted ssid in network policy
XIQ not pushing port configuration on ports 49, 50 of 5320 switch.
Many messages seen with "err amrp2: system: send event "statistics recv event to amrp"(127) with siz...
Does WIFI interface up and down on AP logs cause for concern
AP250 eth1 is down
CWP Self-registration stopped working – Client’s registration return message Internal error
Can the AP460i be onboarded into XIQ using IQ engine code
"No Supplemental CLI" at Device Configuration does not work.
How to copy switch templates between network policies in xiq
XIQ - How to display radio profile mappings
XIQ ML Insight Network 360 Monitor - Inconsistent Health score display issues
Why is the Select button grayed out when I try to assign a location to an AP during the Quick Onboar...
Unable to log into ExtremeCloud IQ after changing email address to wrong one
How to change NTP server to APs in XIQ?
How to enable XIQ email alert for device status change in XIQ Version 23.2.1.4 onwards or Alerts (BE...
[XIQ] Client can't connect to next AP when roaming and need to disable/enable Wifi on client
XMC Articles
NAC sees authentications on ports that are down
If you have any requests for new articles, please let us know! You can either comment on this post, or email me directly at community@extremenetworks.com.
