04-11-2023 06:45 AM
Our support teams published 46 new articles last week! Check out the new titles below!
All
SA-2023-034 - OpenSSL Use-after-free following BIO_new_NDEF (CVE-2023-0215)
SA-2023-033 - Apache Commons FileUpload (CVE-2023-24998)
SA-2023-035 - OpenSSL Timing Oracle in RSA Decryption (CVE-2022-4304)
Campus Fabric Articles
What Is SNMP OID/MIB For VLAN Origin
VOSS: NLS; Seeing "Error: Dhcp client and routing IP address are configured on the given vlan - cann...
IP address when configuring a brouter port for a remote site
Cisco VoIP not Connecting to Correct VLANs on 5520-48W
VOSS : ISIS Accept policy for Inter-VRF route redistribution stopped working when one of the core sw...
In VSP 8600 switches all cards except the master CP rebooted. (slot:SF 12C error: Master CP failed)
VSP 8600: CLI hangs after entering the enable command
Is there a limit to the maximum number of I-SID-to-VLAN assignments supported
Data Center Articles
"version file open error: No such file or directory" when executing "show version"
Lost connectivity to device until port was bounced
EFA 2.7.0.0| SLX9740 | EFA efa inventory device execute-cli execution cmds fails randomly for the de...
Couldn't shutdown bfdd daemon on VDX6740T from shell
Scanning device failed to scan VDX after upgrade to 7.4.1.x
Drift-reconcile failure during SLX-OS upgrade to 20.4.2ac
Unable to configure rpf-mode on port-channel interface or member ports
EXOS Articles
Last successful login time incorrect when using GMT offset
How To Show Entire Port Configuration For A Specific Port
EXOS CLI Cursor Moves From Top To Bottom Randomly
What does the log message "<Info:Kern.Info> (ecmp) tbl del but # used at 0" mean?
What does the log "AGE_PROC=0x1> ETU_BKGND_PROC_SEC_INFO=0x0011e01c: <MULTI=0x0 ET_PA=0x1e01c unit 0...
Legacy Articles
NAC/ Control - Captive Portal Sponsorship - Guest Users Getting Access Without Sponsor Approval
NAC/Control Sends Incorrect ISID Regardless of NAC Policy Mapping and Associated Policy VLAN Island ...
SD-WAN Articles
Why is there no SaaS traffic in application monitoring
Cannot BACKUP DATABASE in NOARCHIVELOG mode
How to enable ExtremeCloud SD-WAN
Universal Articles
How To Use/Activate QSFP28 Ports On Universal 5520 Running VOSS/Fabric Engine
WiNG Articles
WiNG - How to collect the Tech Support Dump from Nova UI
How to view visual AirDefense appliance performance statistics?
3rd party monitoring program shows high bandwidth utilization on NX controller GE interfaces
AP460e is not getting AT power from the POE+ switch
How to see Memory Allocated in AirDefense?
XIQ Articles
Which ports/protocols do XIQ Access Points use for communicating with each other?
What Is The Default IP Address for IQE Devices?
How to add a Local Admin account
How to upgrade from Extreme Cloud IQ Connect to Pilot
How is client 360 operating currently for active and inactive client?
AP360 is adopted to controller, but goes offline
AP4000 WIFI1 interface shows as working but no clients are connecting to it
With AP acting as DHCP server, what is the address scope limit and can you have multiple DHCP server...
Cannot Connect to Network with AP acting as RADIUS server
Clients unable to pass traffic/get IPs due to ARP Shield
Operator admin role with no CLI Access
XMC Articles
ExtremeControl and ExtremeCloud IQ Site Engine - Do these appliances/controllers support TLS 1.3?
If you have any requests for new articles, please let us know! You can either comment on this post, or email me directly at community@extremenetworks.com.
