08-05-2024 07:22 AM
Our support teams published 45 new articles last week! Check out the new titles below!
All
Is it possible to change the Date/Time format displayed in the XIQ?
Campus Fabric Articles
5320-48P fail to boot due to invalid MAC address when running VOSS
VSP7400-48Y-8C: Crashed with Coredump
IPv4 connectivity issues after power outage on some LEAFs
"Error: Not allowed to change interface type when interface is enabled" When Attempting To Configuri...
Where can I find Auto-sense UNI Client with NAC considerations?
UVoSS 5420 BGP limitation
Data Center Articles
What is the path to upgrade SLX 9640 from 18r.2.00b to 20.5.3x/20.6.x?
IP interface is down even when the port of that vlan is up
MPLS LDP session resets after receiving a specific type of MAC address withdrawal LDP TLV
10GSR SFPs using incorrect Threshold Monitor values (LR/ER)
SLX CLI 'clear tm voq-stat ingress-device all egress-port all' not working
SNMP response missing for 40G ports in breakout mode
EXOS Articles
VPEX rings sporadically break
How do EXOS switches treat traffic that is sent to the 01:80:c2:00:00:03 address?
SA-2024-089 - DHCPD Hostname Buffer Overflow (CVE-2004-0460)
Can RFC 3580 work out of the box with 4000 series switches?
General Articles
What is the firmware version extension used in ISW-4W-4WS-4X switch?
WiNG Articles
How to use ADSP REST API to get specific client device information
IP adopted AP lose adoption when primary controller goes down
Which port does an AirDefense and its sensors use?
ADSP alarm table export content
Korean language support on WiNG NOVA GUI
ADSP redundancy failover process
Why does controller generate a crash file while using NOVA UI?
How to use MAC authentication to bypass Captive Portal
XIQ ArticlesXIQ-Controller AP crashes when Alarm action manager is enabled on ADSP
How to use NAS ID as a radius attribute on a radius SSID 802.1x
Is Message-Authenticator radius attribute supported in XIQ?
Is it possible to configure the FATA-Jack Tool alarm threshold in Extreme AirDefense Essentials?
How to add an SSID to only certain Aps
It is not possible to create new users nor modify under Extreme Cloud IQ Account Page
XIQ | Receiving 'incorrect credentials' after swapping AP acting as radius server
Unable to Deselect SSIDs on some Device Groups
Why is my XIQ-C reaching out to mtls-access.afc.wi-fi.com after upgrading to 10.09.x?
What purpose does the "Default IP subnet=192.168.0.0/255.255.0.0;" values serve when the access poin...
CoPilot Dashboard: Understanding the Anomalies Table and Alerts Functionality
How to configure Rate Limit per User Group
Data not being sent to Business Insights
How to exclude certain channels
How to configure "Message-Authenticator" radius attribute in XIQ
XIQ doesn't generate commands for 11ax features anymore
Can the ssid0 be removed from XIQ GUI?
How to configure an IQ Engine Radius AP to talk to a Library SIP server
The network policy cannot be removed because it is used by another object. Please disassociate refer...
If you have any requests for new articles, please let us know! You can either comment on this post, or email me directly at community@extremenetworks.com.
