06-26-2023 10:54 AM
Our support teams published 46 new articles last week! Check out the new titles below!
Campus Fabric Articles
Why doesn't 100BASE-FX SFP operate in ports 25 to 28 on an ERS 3626GTS-PWR+?
Auto-sense doesn't remove onboarding vlan from voice port.
SNMPv1 Traps Not Generated by Switch
Different SFP behaviors between VSP7400 and VSP7200
Switch reporting error "This license has already been revoked" when re-installing license after revo...
"Feature not Supported" error when configuring IPsec security association mode as tunnel on XA1400
EDM/Web Interface Slow and Fails With Error "PR_CONNECT_ABORTED_ERROR"
VIM module is not accepted (switch 5520-48T)
Link doesn't come up when 1Gb Copper SFP is replaced with 10Gb Fiber SFP on a VSP7400-48Y-8C
Is IPsec tunnel supported on XA1400 switches?
How To Retain Port Vlan Membership When Ports Are Members of Dynamic Vlan
Data Center Articles
18r1.00h code:-SLX9540 - SW/0 Processor reloaded - Software Fault:Kernel Panic
VDX 8770-8 Performance Mode Configuration on 27x40 LC Caused Kernel Panic and HA Failover
EFA redeployment removed configured fabric
SLX9540 rebooting periodically on it's own - still after replacement
Egress Listener-Policy Not Working Correctly
MCT Cluster PW Interface down after upgrade from version 20.3.2e to 20.4.2b.
BGPv6 neighbor is in connect state
Why is the MLX, CER, CES sending packets out with VLAN tag 4095?
How to restart ssh server function in SLX?
EXOS Articles
EXOS Switch unable to ping IP of default route / gateway / firewall from switch's other VLANs
ACL error messages are shown at X440-G2 bootup.
General Articles
How to find port utilization on 200 Series
How do I disable / enable PoE on an ISW port?
Legacy Articles
XIQ-C | XIQ Controller not on-boarding to XIQ-Pilot
AP3935 is not migrating to XIQ-C
SD-WAN Articles
Internet traffic from a tele|engine to a Backhauling site is not visible in the reporting/dashboard
Will my appliance automatically retrieve its configuration after being unreachable?
How to upgrade/downgrade an appliance from ExtremeCloud v23x?
Why does the error message "Can't Open Request/Response pipes" appear during the upgrade?
No reports are being shown after report upgrade
Why is there an error "One or more inputs are invalid in LAN" when I configure my appliances?
How to upgrade an appliance from Ipanema SD-WAN v22.x to Extreme Cloud v23.x?
WiNG Articles
ADSP Device Action Manager Does Not Work
AirDefense Services Platform ADSP 9.x software staging information
XIQ Articles
Cannot Use API with SSO (Singe Sign-On) Enabled in CloudIQ
What happened to read-only model_AP Cloud Config groups in Extreme Cloud IQ?
WLAN AP Assign Location Error "Unable to access data"
Does the SSID broadcast when time of day schedule is active?
Cloud RADIUS users are able to connect after user expired and deleted
Cloud PPSK is stopped working, no Radsec election happens
What is the max number of VLANs that can be configured in an XIQ VLAN group?
In what order does an XIQ VLAN group cycle through the VLANs?
Operator account can't manage all APs on defined locations
Export BSSID data from Extreme Cloud IQ GUI
Guest Essentials does not register Guests
If you have any requests for new articles, please let us know! You can either comment on this post, or email me directly at community@extremenetworks.com.
