06-17-2024 07:06 AM - edited 06-17-2024 07:06 AM
Our support teams published 39 new articles last week! Check out the new titles below!
Campus Fabric Articles
VOSS: SLPP Disabling A Single Link Connection To Palo Alto Firewall
VOSS: Android Devices Unable To Obtain DHCP Addresses On A Specific VLAN
BOSS - MLT Trunk link is not allowing for the modification
Data Center Articles
Solarwinds SNMP GetRequests are not being received from VDX switch
Unexpected SLX switch restart out-of-memory Syslog-ng
Radius server configuration on vdx 6740
EXOS Articles
Long ERPS failover times seen when using copper connections
Is it possible to enable egress flooding in vlan?
Web-GUI/Chalet login fails with the error “Restful Service Login Failed” in 31.7.1.x version.
Is there any overvoltage protection for EXOS switches PSU?
VRRP packets are dropped on ISC link between MLAG pair.
VLAN is not propagated with MVRP to inactive MLAG port after switch reboot.
From option in "configure xml-notification target" command not working
General Articles
How to create an ACL to block ICMP Timestamp Request on the ISW switch.
IdentiFi
AP510i Out of Box Booting into WiNG Mode and Requires IdentiFi Mode
Legacy Articles
5GHz Automatic power stays at 20 dB
SD-WAN Articles
Is TCP port 53 open on the WAN side of SDWAN appliance?
Universal Articles
VOSS 5320 - Long time before connection of end client is established
10GB-SR Link between Universal Switches 7520 & 5320 running VOSS not coming up/up
What is supported max flow entries for 5320 and 7520 switches
WiNG Articles
How often rf stats are updated
XIQ Articles
How to enable 802.1x port authentication with certificate on XIQ APs
User PPSK keys are getting generated with wrong Validity dates
New APs showing offline after onboarding
AP is unable to establish a CAPWAP tunnel to redirector IP 54.172.0.252
AP3000 reboot after a short time (permanently)
XIQ- DHCP server option under Device configuration is not working
XIQ - Is there an easy way to compare the device and template level configurations?
ExtremeCloud IQ Controller System Health Alerts
Does the Extreme RF Planner support WiFi6e Access Points?
Newly onboard APs don't have option to change Network Policy and Location under Action Menu
Devices Are seeing Hidden SSID
Clients are only shown with WPA2 even when connecting to 6e radios which only support WPA3
XMC Articles
Extreme Control: 802.1x clients failing to authenticate after power outage
If you have any requests for new articles, please let us know! You can either comment on this post, or email me directly at community@extremenetworks.com.