Summit 24p SNMP OID for extremeEdpNeighborId vanished please help
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎05-18-2015 10:25 AM
OID for extremeEdpNeighborId has vanished from the ExtremeEdpEntry table
out put from snmpwalk..
snmpwalk -v2c -c public 172.16.98.4 1.3.6.1.4.1.1916.1.13.2.1.2
EXTREME-EDP-MIB::extremeEdpNeighborId = No Such Object available on this agent at this OID
I have checked on multiple switches that have been on line for varying numbers of days and are on totally different firmwares but they all behave this way so I am ruling out firmware and needing a reboot unless the vanishing happens moreless on or shortly after its booting up
any further advise would be very much appreciated
thanks
out put from snmpwalk..
snmpwalk -v2c -c public 172.16.98.4 1.3.6.1.4.1.1916.1.13.2.1.2
EXTREME-EDP-MIB::extremeEdpNeighborId = No Such Object available on this agent at this OID
I have checked on multiple switches that have been on line for varying numbers of days and are on totally different firmwares but they all behave this way so I am ruling out firmware and needing a reboot unless the vanishing happens moreless on or shortly after its booting up
any further advise would be very much appreciated
thanks
2 REPLIES 2
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎05-18-2015 10:40 AM
Hi, Jon!
First of all you have to look at ConceptGuide - is there ExtremeEdpEntry.
In EXOS_ConceptGuide for 15.4 there is only extremeEdpTable, extremeEdpNeighborTable and extremeEdpPortTable.
In MIB file there is a lot MIBs from ExtremeWare, so they didn't work in EXOS.
Thank you!
First of all you have to look at ConceptGuide - is there ExtremeEdpEntry.
In EXOS_ConceptGuide for 15.4 there is only extremeEdpTable, extremeEdpNeighborTable and extremeEdpPortTable.
In MIB file there is a lot MIBs from ExtremeWare, so they didn't work in EXOS.
Thank you!
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎05-18-2015 10:39 AM
Hi Jon,
Which application is being used to perform these SNMP walks?
Was there previously a response for this OID when polled in the same way previously?
Were there any changes to the SNMP App configuration or the Switch configuration?
Which application is being used to perform these SNMP walks?
Was there previously a response for this OID when polled in the same way previously?
Were there any changes to the SNMP App configuration or the Switch configuration?
Recommendations
Subject | Author | Posted | |
---|---|---|---|
‎05-29-2023 07:06 PM | |||
‎11-12-2024 02:00 AM | |||
‎08-02-2021 02:38 PM | |||
‎07-19-2023 12:17 AM | |||
‎02-02-2021 05:35 PM |