Extreme Networks

Alexandr_P · 11-23-2021

Hello, colleagues!X590 stack was with 22.6.1.4.Issues began when tryed to upgrade stack directly to 30.7.2.1"Installing to Slot-2(Backup): .....Error: Failed to install image on Slot-2 - tar: corrupted data"Normally upgraded to 30.2.2.17, but again i...

Alexandr_P · 10-28-2021

Hello!X590, EXOS 30.7.2.1 patch1-20Configured VLAN statistics with configure ports 12 monitor vlan XXXconfigure ports 23 monitor vlan YYYBut show vlan statistics on VLAN XXX don't showing Tx traffic: ACL slices available:# show access-list usage a...

Alexandr_P · 10-27-2021

Hello!APs - AP310i with VC with internal RADIUS.Redundancy working fine - after failure control is normally transferred to the backup controller.But after re-election of the controller, the RADIUS server policy activation checkbox is reset (Activate ...

Alexandr_P · 03-22-2021

Hello! Recently there is no possibility to follow web-link within HUB’s topic.When try to follow the link - we have “https://extremeportal.force.com/ExtrSearch?q=#t=Knowledge&sort=relevancy” with blank search line. Thank you!

Alexandr_P · 02-05-2021

Hello! What for “mode” button on front panel of X435?(there is no information in HW Install Guide). Also, am I understand right that 2,5Gbps speed for now unavailable for X435?(When it will be available and what optics have to used?) Thank you!

Alexandr_P · 12-20-2022

https://cloud.kapostcontent.net/pub/38236555-1e21-43a3-9c61-af84c71a5844/wireless-controllers-ds-1.pdfAlso, as far as I remeber you can configure it with XCC (campus controller)

Alexandr_P · 12-19-2022

Hello!3965 it's not WiNG but IdentiFi access points.It isn't work without controller.It can be almost standalone - Site mode. But it's configurating also through controller.

Alexandr_P · 11-24-2021

Hello, James!1. Stack already upgraded to 30.x but issue still persist2. Slot 1 normally upgrading. Issue with Slot 2 upgradeThank you!

Alexandr_P · 11-19-2021

Hello!"supports the connection of end devices (station) on its 4 SFP ports" - yes"to install SFP modules with a speed of 100Mbit or 1000Mbit in these ports?"1000Mbps - yes, 100Mbps - with high probability No, because of, based on "HW Install Guide": ...

Alexandr_P · 10-29-2021

Hello!It's expected behavior.It's mentioned in User Guide "Packets originating from the switch's CPU or forwarded by the CPU may not be reflected in transmit statistics" and checked in lab.

Extreme Networks

User Statistics

User Activity

X590 stack upgrade issue

VLAN statistics no Tx on some of VLANs

DVC with internal RADIUS

There is no possibility to follow link within topic

X435 "mode" button

Re: 3665i initial page setup

Re: 3665i initial page setup

Re: X590 stack upgrade issue

Re: Switch X440G2-12t-10GE4 16530

RE: VLAN statistics no Tx on some of VLANs