cancel
Showing results for 
Search instead for 
Did you mean: 

Problem assigning AP7662 to Device Group

Problem assigning AP7662 to Device Group

Jorge_Cota
New Contributor

Hi.

Has anyone had trouble assigning AP7662 APs to a device group in an ECA?

The ECA is an E3120 and has a version 04.76.02.003.
I have created an adoption policy and with the models AP7632 and AP8432 I have not had any problem.

AP 7662 is adopted, but by not falling into any adoption policy rule, I have tried to manually assign it its device group, but was not successful.

Greetings and in advance thank you.

57b6ed615b0e48ce8bc7de4e04e13aa5_6e296eff-f4c2-4f8f-923f-73c05b6d2338.jpg

 

57b6ed615b0e48ce8bc7de4e04e13aa5_38d8bcd3-4aea-4caa-9bcb-d8dec6c5a864.jpg

 

57b6ed615b0e48ce8bc7de4e04e13aa5_9c30de43-f83c-47fe-bd4a-5bd1c8606b5f.jpg

 

1 ACCEPTED SOLUTION

Martin8052
New Contributor III

Hi,

as the “legacy” Accesspoints are not fully supported in ECA 4.76, I think you cannot create new rules for such “legacy” accesspoints, they are only adopted if rules exist before the upgrade, as I understand the release notes of 04.76.2.35:

---

Re-introduced support for Distributed site deployments through upgrade. Upgrade process grandfathers Distributed sites through upgrade from 4.56 release or configuration import. Settings and assignments for Legacy WiNG (AP75xx, AP76xx, AP8533/8432) or AP5xx models are preserved on upgrade. Grandfathering supports: - Creation of new sites (per 4.56 adopted device set) - Adoption of WiNG Legacy or AP5xx devices to existing or new sites - Leveraging auto-adoption rules to Distributed Sites. Caveats: AP4xx access points are supported in a Centralized site only. AP4xx will not adopt or extend a Distributed site. A fresh installation of 4.76.02: - Does not support Distributed sites or adoption of Legacy AP models - AP5xx and AP4xx models adopt only to a Centralized site.


Martin

View solution in original post

1 REPLY 1

Martin8052
New Contributor III

Hi,

as the “legacy” Accesspoints are not fully supported in ECA 4.76, I think you cannot create new rules for such “legacy” accesspoints, they are only adopted if rules exist before the upgrade, as I understand the release notes of 04.76.2.35:

---

Re-introduced support for Distributed site deployments through upgrade. Upgrade process grandfathers Distributed sites through upgrade from 4.56 release or configuration import. Settings and assignments for Legacy WiNG (AP75xx, AP76xx, AP8533/8432) or AP5xx models are preserved on upgrade. Grandfathering supports: - Creation of new sites (per 4.56 adopted device set) - Adoption of WiNG Legacy or AP5xx devices to existing or new sites - Leveraging auto-adoption rules to Distributed Sites. Caveats: AP4xx access points are supported in a Centralized site only. AP4xx will not adopt or extend a Distributed site. A fresh installation of 4.76.02: - Does not support Distributed sites or adoption of Legacy AP models - AP5xx and AP4xx models adopt only to a Centralized site.


Martin

GTM-P2G8KFN