Extreme Networks

Ruud · ‎09-14-2021

There are 2 sites connected by vpn. On every site there is a ve6120.

I want to make sure that the access points on site 1 use the ve6120 on that site as primary controller

same for site 2, the ve6120 must be the primary controller on that site.

I want to be sure that delays between the 2 sites will not have an impact on roaming information and …

with roaming events: what is the difference between:

Inside XCC from AP/Radio[2] to AP/Radio[2] Network

or

Between XCC to AP/Radio[2]

Ovais_Qayyum · ‎09-16-2021

You can enable the column for “Adoption” info under Monitor > Device > Access Points, which will allow you to see the home controller for the APs. If you are dealing with large no. of APs, it would be easier to use the “Filter” or “Query Builder” option to sort the APs by Site/Hostname etc.

33814c507ba64c568104758fb1f25a8d_1edbbb82-d668-4719-97f3-ad852d606850.png

Regards,

Ovais

View solution in original post

Ruud · ‎09-14-2021

Ok thank you very much 🙂

Miguel-Angel_RO · ‎09-14-2021

Check this post:

Extreme Networks

cluster ve6120: where can you see to which controller an ap belongs?

cluster ve6120: where can you see to which controller an ap belongs?