2: Packet integrity error
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎04-18-2018 04:04 AM
Hello,
I want to copy the backup file from an Enterasys B5 switch to my Netsight server with the following commande:
scp admin@192.168.1.254:/configs/Test.cfg .
connection is etablished after i enter the pwd, and then i got the following messages
Received disconnect from 192.168.1.254: 2: Packet integrity error.
Could someone help me, or explain me what this error is? 2: Packet integrity error.
Thankyou
I want to copy the backup file from an Enterasys B5 switch to my Netsight server with the following commande:
scp admin@192.168.1.254:/configs/Test.cfg .
connection is etablished after i enter the pwd, and then i got the following messages
Received disconnect from 192.168.1.254: 2: Packet integrity error.
Could someone help me, or explain me what this error is? 2: Packet integrity error.
Thankyou
1 REPLY 1
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎06-19-2018 05:44 AM
Hi Bruno,
I believe you are hitting this one, please check and see if this helps
https://community.extremenetworks.com/extreme/topics/connectionproblems-with-plink-putty-for-command...
I believe you are hitting this one, please check and see if this helps
https://community.extremenetworks.com/extreme/topics/connectionproblems-with-plink-putty-for-command...