Bug : Events' Filters with a permanent filter on

[Nealo]

Hello,

I've been working with Signals for a while and noticed none of my signals were listed in the Alarms & Events->Events page, unless it was an Error.
Then, I noticed there was constantly a filter on, only letting me see events with a Severity set as Error.

I tried clearing the Filter in the column and reseting the filters at the bottom of the page. But it doesn't erase it.

Maybe I am not understanding something and it's only supposed to show Errors, but it would seem weird to me.

Is there anyone who was in a similara situation ?

Thanks.

[Nealo]

Clearing the Browser Setting worked.

Thanks a lot for the help.

Have a nice day !

[Zdeněk_Pala · Accepted solution]

You can try Clear Browser Setting. In the top menu.
You can try other browser to confirm it is not browser/cache issue.
You can upgrade to 8.2.8.1 (supported GA version)

[Nealo]

I'm using version 8.2.4.55, on Google Chrome v. 76.0.3809.100.

I can define filter too. I can even add "Severity = Error" filter, to have two in the "Filters in use" window.

[Zdeněk_Pala]

What version are you using? It works well for me in 8.3.0.111
I can define filter, I can reset filter... what browser do you use?