cancel
Showing results forĀ 
Search instead forĀ 
Did you mean:Ā 

Change NetSight mgmt IP

Change NetSight mgmt IP

Goh_Chern_Jie
New Contributor
Example : mgmt IP from 172.168.0.1 change to 172.168.50.1 .

After changed the NetSight mgmt IP and i at webUI click on the console link show me error below :

3db26b55683848ef9b0f251d781ca2f0_RackMultipart20151204-28954-asp624-error_inline.png

26 REPLIES 26

Goh_Chern_Jie
New Contributor
I from Singapore ļ™‚

Maybe you can ask Ng Kim Pin who is my SE cause i also not sure ļ˜›

It looks like this is more than a simple solution and involves a troubleshoot session. You should escalate this with your appropriate Support resource.

Matthew_Hum1
Extreme Employee
Who is your local SE? what country are you in? I will communicate directly with them and figure out what we can do to assist you in this.

Goh_Chern_Jie
New Contributor
Hi Matthew ,

It binded to correct new IP:

grep binding server.log

2015-12-02 07:57:16,885 INFO [com.enterasys.netsight.api.ServerInfoLogger] ** The NetSight server is binding to IP address: 10.8.x.xxx **

2015-12-02 08:31:53,013 INFO [com.enterasys.netsight.api.ServerInfoLogger] ** The NetSight server is binding to IP address: 10.8.x.xxx **



Goh_Chern_Jie
New Contributor
it show me {User Login Failed. Unable to authenticate user} when login oneview.

If suspect not using RADIUS or LDAP authentication for the authentication .

I can configure back to old IP then configure connect to Radius .

Can i say if i connected to radius mean i can change my mgmt ip ?

GTM-P2G8KFN