cancel
Showing results for 
Search instead for 
Did you mean: 

Customize Device List Tree in Console

Customize Device List Tree in Console

Chris_Yereaztia
New Contributor
Hello Everyone

We are in the process of migrating from Ridgeline to Netsight and one request an engineer made was that the List of Devices in the DeviceTree should show the system Name of the Switch and the IP address instead of just the IP address.

His remark was that in Ridgeline the Device-Name and the IP address of the device was shown in the device list. However in Netsight you can choose between: the IP Address or the SysName. You can have either but not both together (See Screenshot)

Device List can show the sysName (or the default: ip address)



I noticed that only the following options are available in the preferences



Is there any way to customize this setting for example Use System Name and the IP Address. I noticed that whenever I change the setting the following file is modified:

C:\Users\\AppData\Roaming\NetSight\Console\Options\DataDisplayOptions.properties

The property is either set to systemName or ip

DataDisplayOptions.deviceDisplayNameFormat=systemName

or

DataDisplayOptions.deviceDisplayNameFormat=ip

Is there an option like systemName + ip which would show both?

Best Regards
Chris

3 REPLIES 3

Chris_Yereaztia
New Contributor
* BUMP *

Any updates on this one ?

Chris_Yereaztia
New Contributor
We are running Netsight Version 7.0.9.4


Bharathiraja__S
Extreme Employee
Hi Chris,

can you share the netsight version ?

Thanks,
Suresh.B
GTM-P2G8KFN