Enforcing Netsight 6.3.184 Console trunk template on EXOS x440-g2 problem

[MarekorMark]

Hi

I have a problem to execute port template (trunk port template) which was made with Netsight Console 6.3.184 on x440-g2 port (with EXOS)

What can cause the problem? How to make it work ?

please help
Regards
Marek

[Daniel_B]

No, in Extreme Management it is the same. You can configure native VLANs via OneView or NetSight Console. But on trunks I mean you have to do it by hand on the shell.

https://gtacknowledge.extremenetworks.com/articles/How_To/Netsight-XOS-Vlan-Management

https://community.extremenetworks.com/extreme/topics/vlan-configuration-via-netsight-or-oneview-basi...

[MarekorMark]

its kind of like that with extreme in this situation

[MarekorMark]

So your saying that i need to upgrade / move to Exreme Managment 7.0 (nac 7.0) and it will work ritght?

[Daniel_B]

Hi Marek,

I think the VLAN configuration with NetSight work only with EOS not with EXOS till now.

Regards Daniel