cancel
Showing results for 
Search instead for 
Did you mean: 

EXOS G1 report for open ports vs 802.1x ports vs mac netlogin ports

EXOS G1 report for open ports vs 802.1x ports vs mac netlogin ports

Ahmed_Haroun
New Contributor III
we have a lot of G1 and G2 mix of switches.

Looking for a way to generate a report about the authentication status of EXOS G1 switch ports, whether they are enabled for netlogin mac, 802.1x or open port, need the report per switch.

Possibly using XMC or Flexviews , or whatever other possible ways through scripting may be.

anyone did it before?
4 REPLIES 4

Tomasz
Valued Contributor II

Hi,

 

Is it required something in a different form than ‘show netlogin session’?

 

Hope that helps,

Tomasz

WagoL
New Contributor II

Hi Ahmed 

What was the provided solution for this case?

Doug
Extreme Employee
I would suggest contacting the GTAC for further assistance on this question.
https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-contact-Extreme-Networks-Global-Tec...
Doug Hyde
Director, Technical Support / Extreme Networks

Ahmed_Haroun
New Contributor III
Any idea?

this should be doable somehow reading specific OID may be that i cannot figure out.

GTM-P2G8KFN