Hello, everyone,
I have an X465 as CB and a V400 as BE.
Everything works fine, only in the XMC there is no link between the two devices.
Additionally the status is defined as "Unknown".
Is there any trick to actively trigger the link connection and status polling?
Directly on the switch the status is ok:
Slot-1 VPEX TB-12E107-R7S2.2 # show vpex
Virtual Port Extender: Enabled
Auto-Configuration: Disabled
Auto-Upgrade: Enabled
Ring rebalancing: Off
Zero Touch Provisioning: Nothing Provisioned - Existing configuration present
Cascade
Port/MLAG Id Slot
====================
1:21 100
EXOS Version: 30.6.1.11-patch1.2
XMC-Version: 8.4.3.24
Many thanks,
Sandro
