cancel
Showing results for 
Search instead for 
Did you mean: 

How do you change the archiving script VR in Netsight version 8.0.3 as Inventory Manager no longer exists?

How do you change the archiving script VR in Netsight version 8.0.3 as Inventory Manager no longer exists?

stephanos_kaish
New Contributor II
We are running the latest version of Extreme Management 8.0.3 and they have remove the entire Inventory Manager utility.

We have a number of new switches where management is on the VR-MGT and Netsight is unable to archive these switches and im not able to see/find a way to change the VR Netsight uses to archive.

The description of the archive error: The device was unable to download the configuration. Check that the correct VR is being used.

4 REPLIES 4

stephanos_kaish
New Contributor II
Thank you again

Karthik_Mohando
Extreme Employee
Expand (EDGE CAMPUS) > Highlight the date and time and you should have Alert for the failed devices.

stephanos_kaish
New Contributor II
Great, will give this a go 🙂

Also how you see which devices archives failed as on the archive screen it just tells the number of failures and I cannot see how to see which devices actually failed:

7f448fa76490494e97d05274dc74e3e4_RackMultipart20171003-79964-17oix4s-failed_inline.jpg



Karthik_Mohando
Extreme Employee

Hi Stephanos,

This article is modified and should help.

https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-create-a-new-Inventory-Manager-scri...

From EMC 8.0 Inventory manager is depreciated hence the first 4 steps can be done from Oneview as below
Right click on the intented switch > Configuration/Firmware > Set configuration
https://gtacknowledge.extremenetworks.com/servlet/rtaImage?eid=ka1340000000J5q&feoid=00N80000005AsmE...

GTM-P2G8KFN