Netsight alarm ip-security

[JohanHendrikx]

I configured on a switch ip-security DHCP-snooping. I also created an alarm in Netsight.

When I receive an alarm, the information is:

IP Security Violation VLAN ifIndex INTEGER: 19 VLAN Description STRING: VLAN-NAME Port ifIndex IP MAC Violation Type .

How can I get the information ?

[Annas_Shaker]

Johan, here is a link for an article in our knowledge base that references this issue:
https://gtacknowledge.extremenetworks.com/articles/Solution/NetSight-IP-Security-Alarms-Show-UNKNOWN...

[Mike_Thomas]

Johan, after further review and re-creation we have opened up a case for you regarding this, and will follow up with that. Let me know if you do not see that case.

[Mike_Thomas]

Johan, the means that the product is not sending in any data for those parameters. We looked at the security template in netsight, and it appears to be correctly for receiving said traps.
So this does not appear to be a formatting issue. I have added the XOS category into the discussion. Maybe they can assist with some recommendations.

[JohanHendrikx]

I've tested it with netsight 6.2.0.211. The switch that send the alarm is a x250-24p with firmware 15.3.1.4 patch1-44