Netsight ELRP script

[Justsomebodi]

Hi All

I need to change the settings of ELRP interval. I have found this script which i am sure can be used in Netsight.

disable clipaging enable elrp-client

set var sv "#ELRP POLL STARTED#"

show var sv

set var cli.out 0

show vlan

set var sv $TCL(split ${cli.out} "\n")

set var e $TCL(lsearch $sv *(B)*)

set var i 5

set var e ($e - 1)

while ($i < $e) do

set var cli.out 0

set var v $TCL(lindex $sv $i)

set var vn $TCL(lindex $v 0)

set var z $TCL(regexp {Mgmt} $vn)

if ($z == 0) then

conf elrp-client one-shot $vn port all print

set var p $TCL(split ${cli.out} "\n")

set var p1 $TCL(lsearch $p *NO*)

if ($p1 == -1) then

set var p1 $TCL(lindex $p 2)

set var p2 $TCL(lindex $p1 9)

set var p1 $TCL(lrange $p1 0 6)

set var p1 $TCL(concat $p1 $p2)

set var p2 $TCL(lindex $p 3)

set var p2 $TCL(lrange $p2 5 7)

set var p $TCL(concat $p1 $p2)

show var p

else

set var p1 $TCL(lindex $p 2)

set var p2 $TCL(lindex $p1 10)

set var p1 $TCL(lrange $p1 0 7)

set var p1 $TCL(concat $p1 $p2)

show var p1

endif

endif

set var i ($i + 1)

endwhile

disable elrp-client

enable clipaging

set var sv "#ELRP POLL COMPLETED#"

show var sv

But am unsure as to how much of it i need. All I need to do is conf elrp-client periodic vlan ($variable) ports all interval 20

The above sript does way more, so i assume i can delete parts of it. Does anyone know which ones?

Also would i need to add excluded ports to the script even though it has already been defined.

[Justsomebodi]

XOS 16.1.1.4

[Matthew_Helm1]

What version of EXOS are you running?

[Justsomebodi]

Hi

Tested the script and it failed with the below error

*** Error at line - 59 ***
invalid command name "config elrp-client periodic ports All interval 5 log disable-port ingress 300"

Line 59 is

set var recmd $TCL(concat "config elrp-client periodic" $v "ports" $p "interval" $int $lt)

I am so confused. Doesn't seem to like the ingress 300 bit.

if (!$t) then
set var recmd $TCL(concat $recmd "disable-port" $ie)
set var t $TCL(regexp {\d+} $d)
if ($t) then
set var d $TCL(concat "duration" $d)

So i did

set var recmd $TCL(concat "config elrp-client periodic" $v "ports" $p "interval" $int $lt)
if (!$t) then
set var recmd $TCL(concat $recmd "disable-port" $ie "duration")
set var t $TCL(regexp {\d+} $d)
if ($t) then
set var d $TCL(concat "duration" $d)
endif
set var recmd $TCL(concat $recmd $d)
endif

But still get the error.

invalid command name "config elrp-client periodic Extreme1 ports All interval 3 log disable-port ingress duration 300"

The command works in the cli.

[Justsomebodi]

Thanks for the explanation.

[Matthew_Helm1]

Yes. It takes the int variable in at the top and makes that the interval for all ELRP VLAN instances. It assumes you are not running any one-shot instances of ELRP on a VLAN. It only works on 16.1 forward because the ports are shown in the output without spaces in that release of EXOS fwd, else it could get really messed up.