cancel
Showing results for 
Search instead for 
Did you mean: 

Network and Application Performance indicators in the XIQ-SE

Network and Application Performance indicators in the XIQ-SE

Johannes1
New Contributor II

Hi Community,

can someone tell me what the Network and Application Performance indicators in the XIQ-SE Dashboard mean? Also how do I enable this? I can't find anything for it.

Johannes1_1-1752475964777.png

Best regards

Johannes

 

1 ACCEPTED SOLUTION

tim753milner
New Contributor

Hello,

Network and Application Performance indicators in XIQ-SE show latency and response times based on flow data and client traffic.

To enable them:

Ensure NetFlow/IPFIX is configured on devices.

Enable device and interface statistics in Historical mode.

Set up application telemetry (ERSPAN tunneling of client traffic) to XIQ-SE.

Without client packet data, these metrics won’t appear—even if flow data is sent.

 

Best Regard,

Tim

 

View solution in original post

1 REPLY 1

tim753milner
New Contributor

Hello,

Network and Application Performance indicators in XIQ-SE show latency and response times based on flow data and client traffic.

To enable them:

Ensure NetFlow/IPFIX is configured on devices.

Enable device and interface statistics in Historical mode.

Set up application telemetry (ERSPAN tunneling of client traffic) to XIQ-SE.

Without client packet data, these metrics won’t appear—even if flow data is sent.

 

Best Regard,

Tim

 

GTM-P2G8KFN